Best toilet pros near Kimball, NE

The cost to install a new toilet typically runs from $225 to $530. This doesn’t include the price of the toilet itself, which can cost $90 to $1,500 depending on the model and features you choose. You can save money if you choose to install a toilet yourself. However, you might want to hire a pro for this project.

"Due to the many complexities of replacing a toilet flange, it is typically a job best left to the pros," says Jeff Botelho, Angi Expert Review Board member and plumber. "Many times it isn't as simple and straightforward as 'pop off the old one and pop on a new one' because the flange is either glued on (PVC/ABS), soldered on (brass/copper), or caulked in place with a lead & oakum joint (cast iron) and none of these things can be easily reversed without years of training and repetitive practice."

DIY is possible for minor repairs or replacements. Professional services ensure proper installation and leak prevention.

Yes, you should screw your flange to the subfloor, including cement. The best way to get this done is to predrill holes into the concrete using a hammer drill and a ¼-inch concrete bit. Be careful when you’re ready to bolt your flange down, as you can accidentally crack it. You can avoid this issue by not installing the screws too deep. Or, you can opt for a flange with a stainless steel ring so you don’t have to worry about cracking the plastic.

Yes, you’ll need to replace your toilet’s wax seal any time you move the toilet. This is because movement of the toilet will break the seal, rendering the remaining wax useless. Thankfully, replacing a wax seal is fairly easy, and the seal itself only costs $2 to $10 at most home improvement stores.

When replacing a wax seal you typically also have to replace the closet bolts that secure the toilet to the flange. These are usually about 2.5" - 3" long and have to be cut once the toilet is secure. Cutting them usually makes them too short to reuse.