Get matched with top drywall pros in Humphrey, NE

Yes, 1/2-inch thick drywall is commonly used for ceilings in residential construction. It provides adequate support and is easier to handle and install compared to thicker drywall sheets. Thicker drywall, such as 5/8-inch, is typically used for ceilings in commercial buildings or areas requiring additional fire resistance or soundproofing. However, for most standard residential applications, 1/2-inch drywall is sufficient and widely accepted.

You should stagger drywall sheets to help prevent cracking. The joints between drywall sheets are the weak spots, so if you install drywall with seams aligned, you’ll create weak lines that run across the length of the wall and extend from floor to ceiling. But when you stagger drywall, the solid sections of panels will support the joints. This can prevent seams from cracking or separating due to fluctuating temperature and humidity, vibrations from movement inside the home, and gravity.

In most cases, no, you won’t need a permit to replace drywall. If you’re changing the floorplan of your home by adding or removing walls during the drywall project, then you might need a permit, but replacement or repairs usually doesn’t require a permit. Your drywall professional should be able to confirm whether or not a permit is required for your project. If it is, it’s likely to add between $50 and $150 to your total cost. Keep in mind that you will need permits if you plan to install new electrical wiring or plumbing lines behind your new drywall.

Yes, wainscoting is installed directly over drywall. However, ensure the drywall is in good shape since it will support the wainscoting. If the drywall has issues, such as holes, mold, or mildew, repair them before installing the wainscoting. Alternatively, you can install a plywood substrate before attaching the trim.