Best septic tank pros near Gering, NE

How do you set your well’s pressure tank? All you need to do is first drain the tank of water and find the pressure switch. Remove the switch cover and adjust the switch with a wrench—clockwise to increase water pressure, and counter-clockwise to reduce it. Each complete turn of the nut on the switch should equal 2.5 psi. Once this is done, replace the switch cover. All that’s left is to adjust the pressure of the tank itself using an air compressor and a tire gauge to support the new setting.

Schedule annual inspections, monitor water pressure, and address minor issues promptly to avoid major repairs.

Good news: You’ll naturally increase the bacteria in your septic tank simply by using it. If you want to encourage more good bacteria growth, stop using products and household cleaners that kill bacteria, such as bleach and harsh chemicals. Never flush antibiotics, and make sure only water and waste go down the tube—not paper products, feminine hygiene products, or diapers.

Adding a thin layer of dirt over a septic drain field is fine, especially if soil erosion has occurred. However, adding too much dirt can compact the soil, reducing the drain field’s ability to absorb and filter wastewater properly. Avoid using heavy clay soil, as it can prevent proper drainage. Instead, use a light layer of topsoil and plant grass to help with soil stability.