Get matched with top drywall pros in Genoa, NE

In most cases, no, you won’t need a permit to replace drywall. If you’re changing the floorplan of your home by adding or removing walls during the drywall project, then you might need a permit, but replacement or repairs usually doesn’t require a permit. Your drywall professional should be able to confirm whether or not a permit is required for your project. If it is, it’s likely to add between $50 and $150 to your total cost. Keep in mind that you will need permits if you plan to install new electrical wiring or plumbing lines behind your new drywall.

Drywall installation is considerably faster and more affordable than plastering. Because plastering involves applying a wet material, it’s more time-consuming, takes longer to dry, and is more prone to cracking. It doesn’t tend to be as insulative either. If you need resurfacing work done on the walls, it's not unusual for the cost of plastering to hit $10 per square foot, which is much higher than the drywall installation costs of $1.50 to $3 per square foot.

If you’re looking for good soundproofing and want a high-end look in a historic home, though, plastering may be the better option.

There are a few easy ways to locate a wall stud without a stud finder. First, try knocking on the wall with your knuckles. Most parts of the wall will sound hollow, but when you tap over a stud, it will sound more solid. Alternatively, since studs are spaced 16 or 24 inches apart, you can measure those distances from a corner of the room, which will always have a stud.

Yes, taping inside corners is a critical step in the drywall installation process.  Properly taping inside corners is essential for achieving a professional look, and an installation that resists cracking and maintains its integrity over time. Taping the corners involves the application of a joint compound along the seam where two drywall pieces meet. This process provides reinforcement, conceals the seam, and prevents future gaps or cracks from developing.