Get matched with top fencing pros in Franklin, NE

A high-quality wrought iron fence is one of the most durable options available and can last a lifetime, or even centuries, with proper care. However, wrought iron is susceptible to rust and corrosion if not maintained.

To maximize its lifespan, regular maintenance is required. This includes:

• Cleaning the fence with soapy water every six months.

• Scrubbing away any rust or corrosion as soon as it appears.

• Applying a new coat of paint or refinishing the fence every few years to protect the metal from moisture and oxygen. The recommended frequency varies, with sources suggesting anywhere from every 1 to 10 years.

If significant rust develops, it's wise to hire a professional fence repair company to clean the rust and reseal the fence. The cost to refinish a fence is typically between $5 and $12 per square foot, a worthwhile investment to ensure its longevity.

To choose where to add a fence gate, know where fence gates shouldn’t go. For example, you should avoid placing gates over low spots on the ground where water can collect and form muddy puddles. Many ranchers install gates at the corner of a fence. Certain gate placements may also be required depending on the type of gate latch you use.

Ideally, when you replace a fence post, you should also replace the concrete footing. The concrete bonds to your new post, creating a secure base. If you install a new post into old concrete, it won’t be as sturdy.

That said, it is possible. Sometimes the post will lift right out of the concrete. If not, you can use a high-lift car jack to try and lift the pole out of the footing. Put the new post into the same hole and backfill it with fast-setting concrete. Keep in mind, this won’t work well for metal posts.

There are two things you can do to make a fence replacement easier—but keep in mind that easier doesn’t mean better. First, you can use a jack or some other type of machinery to pull the post out of the ground. If that’s not available, a digging bar can help.

Second, you can backfill the hole with gravel rather than creating a concrete footing. Keep in mind, gravel is less secure. You should only use it if you’re installing a lightweight fence or have heavier, clay soil.