"Everlight Solar and their products are great, I would highly recommend it! I was extremely skeptical on this at first, but my energy consigliere Nick Carnagey was very patient and made sure every concern I had was fully addressed. And anytime I had a question or concern he and the rest of the staff at Everlight were always super helpful and quick to respond. The system looks great! It consistently performs as Everlight said it would or better. Our first energy bill with the system on for a month was only $45 which was mostly the basic hookup and service fees. The install process took only an afternoon and the install guys could not have been more professional or courteous. You really can't go wrong with the folks at Everlight and the systems they use and install."
"The HandyMasters were a great find for us and weâ re glad we found them. Eddie is super accountable and great at communicating schedules and timing. And the attention to detail, and craftsmanship in their work is top-notch! Eddie and his brother are very knowledgeable and they were a pleasure to work with. They also clean up after themselves very well, which you donâ t always get that extra touch with some in the industry. I highly recommend these guys for any of your carpentry needs!!!"
Quality Work. Honest Service. Built to Last.\n\nI’m a locally owned and insured LLC serving the Omaha area and surrounding communities within approximately 50 miles. With 10 years of hands-on experience in tile, flooring, home improvement, and general handyman work, I take pride in helping homeowners get projects done correctly, efficiently, and with quality results.\n\nMy experience goes beyond just one trade. I can help with tile installation, flooring projects, appliance installation, repairs, home improvement projects, and a variety of general handyman needs. I also own a dump trailer, allowing me to assist with yard cleanups, debris removal, hauling, and other dump-related projects.\n\nAs a father of three, I understand how important your home is to your family. My philosophy is simple: work hard, treat people honestly, and never cut corners just to get a job done faster. I believe the quality of your work should speak for itself.
"TJ was very professional and diagnosed the problem quickly. He was very polite and replaced all the electrical panels and cleaned up after himself. I would recommend this company to others."
"JP Electric installed a Kohler generator for us and they did an excellent job! They were on time and on budget. The generator looks and works great and we could not be happier. HIGHLY RECOMMEND JP ELECTRIC!!!!!"
"I recently had this company install a new generator and upgrade my electrical panel. The work was completed efficiently and to a high standard. The technicians were protessional and handled the installation and upgrade without unnecessary delays. Overall, lam satisfied with the results and would consider using their services again for future electrical needs."
On average, the cost to wire a new home ranges from $2 to $5 per square foot. The cost to rewire a house is around the same, ranging from $2 to $4 per square foot. Often, though, new wiring comes with lower overall costs since it’s much easier to access a home’s foundation.
To prevent a plug from overheating, always ensure that the electrical load connected to the plug does not exceed the plug's capacity. If the plug feels hot to the touch or emits a burning smell, immediately shut off the circuit breaker and unplug all devices from the hot outlet. Prevent electrical fires by avoiding using extension cords or adapters with the plug, as they can cause it to overheat due to increased resistance. Additionally, ensure that the plug is properly inserted into the outlet and that the outlet is not damaged or loose.
Pellet stoves do require electricity to power their automated features, such as the pellet feeder, fans, and digital controls. However, their electricity consumption is relatively low compared to other household appliances. During a power outage, pellet stoves equipped with battery backup systems or manual ignition options can still operate, though fans and automatic feed mechanisms may not function. Have a backup heating plan in place for these situations, especially if you live in a region prone to severe weather events.
If you’re outlet isn’t working but the breaker isn’t tripped , that could mean a number of things. First, check if it’s a GFCI outlet, which has added protection so your breakers don’t malfunction. If that’s the case, simply hit the outlet's reset button and see if it works. If it doesn’t, or you don’t have a GFCI outlet, you might have a loose outlet or loose wiring, a damaged breaker, or an overloaded circuit, which would require a dedicated breaker. It’s best to consult with an electrician to diagnose the problem accurately.
In many cases, you can sell your house if it has aluminum wiring, but you are likely required to disclose that fact during the sale. In some cases, your city or area may have banned the sale of homes with aluminum wiring, so you’ll need to update the wiring or arrange for its replacement as part of the sale. In some cases, it will benefit your home sale to replace the wiring system before putting it on the market.
The Elmwood, NE homeowners’ guide to electrical services
From average costs to expert advice, get all the answers you need to get your job done.
Is it time to upgrade your electrical panel? For the sake of safety, find out sooner than later by exploring our top signs that it’s time for an upgrade.
