Get matched with top drain pipe installers in Broken Bow, NE

You can adjust the mixing valve on your shower if it uses a single handle to control both hot and cold water by removing the handle and adjusting the cap on the mixing valve. The cap fits over the valve handle and creates a low and high point for your handle to spin. Remove the cap and turn it to adjust how it mixes hot and cold water, and then replace the cap and reinstall the handle.

While you can complete this task if you have some DIY knowledge, it is recommended that you hire a plumber to ensure that the work is done correctly and safely. This is especially true if a new water line needs to by installed from scratch, as this process requires cutting into pipes or walls.

If you're connecting your gas line to appliances, the pro doing the work may recommend flexible corrugated stainless-steel tubing (CCST). Polyvinyl chloride (PVC) with high-density polyethylene (HDPE) is another relatively inexpensive material commonly used for residential pipes. Ultimately, you'll need to find out what is permitted based on the code requirements in your area.

According to the Uniform Plumbing Code (UPC), the distance between your trap and the vent should be no more than 6 feet. For your vent to work properly, it needs to feed into the drain line within 6 feet of trapways that connect to it. Using this formula, you should be able to determine whether you will need multiple vent lines.