Best above ground pool installation pros near Bloomfield, NE

You can place a pool alarm on the surface of the water or mounter underwater with motion detectors. Alarms placed on the surface will alert you if it detects wave movement. If mounted below the surface, known as "sub-surface,” the alarm detects changes in water pressure.

Any number between 7.2 and 7.8 is an ideal pH for swimming pools or 80 to 120 ppm. Your pool testing kit should be able to measure both of these numbers. If your pool’s pH is below this range, the water is too acidic and can cause scaling and damage to pool equipment. If the water’s pH is above this range, it can decrease the effectiveness of necessary chemicals, like chlorine.

It’s a good idea to wait at least 24 hours after opening your pool before you swim in it. Pool opening often involves shocking the water, and the chemical levels need to come down a bit before it’s safe to swim. You can continue testing your water pH and chlorine levels if you’re in a rush. It’s wise to wait until your chlorine levels drop to under four parts per million (ppm) and you have a water pH of between 7.2 and 7.8. You can artificially lower your water pH to speed up the process.

There are pros and cons of in-ground vs. above-ground pools, which you should consider when choosing the pool of your summertime dreams. Some factors to think about include: 

• Above-ground pools are semi-permanent and movable, whereas in-ground pools are permanent structures.

• In-ground pools are more expensive to install than above-ground pools. 

• It takes one to three days to install above-ground pools and several weeks for an in-ground pool install.

• You can install an above-ground pool in smaller yards, but you need plenty of space for an in-ground pool.