Get matched with top bathroom fan installation pros in Arnold, NE

The direction your ceiling fan spins helps create comfortable airflow in your home and can also help cut down on energy costs. 

During summer, your ceiling fan should spin counterclockwise. This will push cooler air downward in a column and help lower your room’s air temperature. In the winter, set your ceiling fan to spin clockwise and at the lowest speed setting. This will pull cool air upwards, displacing the warm air that pools towards the top of your ceiling and bringing it down towards the floor.

Fan power is measured by CFM, or cubic feet per minute. For every 1,000 feet of square footage in your attic, you need a minimum of 700 CFM. Steeper roofs may need larger fans or about 840 CFM.  You can figure the size of attic fan you need by multiplying the square footage of your attic floor by 0.7. (multiply by 1.2 for a steep roof and 1.15 for a dark roof). That number is the CFM required for your fan to run efficiently.

A ceiling fan can become unbalanced for several reasons. Common causes include an accumulation of dust and dirt on the blades, which adds uneven weight. Over time, hardware like screws and fasteners can loosen due to wear on the blade holders. Other potential issues are damaged or bent blades or blade arms, worn-down parts, or an incorrect initial installation.

It is unlikely that a ceiling fan will fall, even if it develops a wobble. During a proper installation, ceiling fans are securely bolted to a ceiling joist, and the fasteners used for mounting are generally separate from the components related to balancing. A wobble is typically caused by an imbalance, which can be annoying and may lead to other issues, but is not usually dangerous on its own.

However, if a fan is wobbling because it was not installed correctly, it could be at risk of falling. For safety, it's always a good idea to ensure all mounting screws are tight and to address any wobbling or imbalance issues promptly.