"We pay yearly but we have this is included with our rental property. They are pretty good on most things. We had a hot water heater replaced and they did an excellent job on that. They are very quick on their response. They dont come out here. It is all done on the internet. I just like the idea that one time service charge is so much better than trying to hiring someone to come in. It is more about convenience. It pays for itself."
It is very difficult and dangerous to install your own water heater, so we strongly recommend against tackling this as a DIY project. Not only will you need to wire your water heater, but you’ll also need to connect plumbing to the intake and outlet. Sweating copper pipes and connecting wiring properly are skills most DIYers don’t have, and even if you do feel confident you can do it, working with water and electricity always leaves the potential for electrocution. Hiring a local water heater installer is well worth the investment.
An average-sized empty water heater weighs around 150 pounds. Tankless water heaters are much lighter, weighing between 10 and 50 pounds. The smaller size and added convenience come at a price, though—tankless water heaters average about twice the price of their traditional counterparts.
No, you’ll need to drain the tank before changing a water heater element, as the water heater element sticks through the side of the tank and uses a gasket to prevent water from pouring out. However, you don’t always need to drain it completely. If you’re only replacing the upper heating element, you can drain the tank until the water line is below the element. If you’re replacing the lower element, you’ll need to drain the whole thing.
When the water expands in a hot water heater, it puts pressure on your hot water pipes and can cause leaks or a rupture in the hot water tank under certain conditions. Pipes or water heaters may split due to the pressure where there is a backflow preventer that prevents the hot water heater from diffusing pressure by releasing water back to the public water line.
In these scenarios, a hot water heater expansion tank provides a place for the hot water heater to relieve pressure and prevent bursts and leaks.
Choosing between an electric water heater vs. a gas water heater comes down to personal preference. Overall, electric heaters are more energy efficient than their gas competitors. They’re also quieter to operate, take up less room, and don’t come with a risk of gas leaks.
The downside is that electric water heaters cost more to operate than gas. They might also struggle to heat water fast enough for households that use large amounts of hot water. Lastly, a power outage could cause your electric water heater to stop working, whereas gas water heaters may still function.
The Towner, ND homeowners’ guide to water heater services
From average costs to expert advice, get all the answers you need to get your job done.
Looking to replace or upgrade your water heater? Use this water heater replacement cost guide to see what the work will cost and what factors affect your total.
A water heater flush costs $160 on average but can vary based on the unit size, type, labor, location, and more. Keep reading to learn how much you could pay.
Who can install a water heater for you? Look to hire a water heater installation pro or a licensed plumber for this job because of the challenges involved.
The average lifespan of water heaters is 6 to 15 years for conventional models and up to 20 for tankless ones, but it can be less if they are not properly maintained.