Top-rated masons.

Get matched with top masons in Steele, ND

Enter your zip and get matched with up to 5 pros

Need a pro for your masonry work project in Steele, ND?

Select your specific project to find the pro for you.

Find Masons in Steele

Avatar for American Waterworks
American Waterworks
4.6(
169
)

Serving Steele, ND and surrounding areas

Approved

In business since 1989

Free estimates

Warranties offered

"Our project was actually a crawlspace encapsulation. We have a lake cabin that was built in the 1960's. It had a dirt floor in the crawlspace with bare block masonry foundation walls. It also had old, damp batt insulation that was falling down from the joist spaces. American Waterworks came in, removed the old insulation (a nasty job!), laid down a 2 layer moisture barrier system and spray foamed the foundation walls and rim joist area. I can't believe what a difference this has made to our air quality, much warmer floors. We used to have to wipe down the windows every morning during the winter because of condensation. Not any more! I would highly recommend this company if you have the same needs!!"
Another Sinking Floor
Dirt Crawlspace in Elk Mound, WI
Concrete stoop had sunk over 6 inches
Foundation Failure Signs
Increased Efficiency of Crawlspace in Elk Mound

+156

Response time3 hrs
645 neighbors recently requested a quote
Recommended by92%of homeowners
Poitra Masonry, Inc.
4.0(
1
)

Serving Steele, ND and surrounding areas

In business since 2009

We're dedicated to providing our clients with the very best in concrete installation and repair for driveways, sidewalks, patios, steps and a variety of other projects. With over 15 years of industry experience, we take an enormous amount of pride in the attention to detail put into each of the projects we're involved with. We're known for our quality work and the integrity of our business. We look forward to building long-term relationships with our clients, and guarantee your satisfaction.

Response time2 days
Recommended by100%of homeowners
Showing 1-10 of 13
Masonry questions, answered by experts

Costs range from $3,500 to $15,000, depending on material, labor, and design complexity.

Depending on the amount of soot present, you can vacuum some of it using a brush attachment on your vacuum cleaner. Then, remove the leftovers with a mild cleaner, such as dish soap or vinegar mixed with water. Before applying a cleaning solution, saturate the bricks with clean water to prevent the cleaner from penetrating beyond the surface and causing structural damage to the bricks.

Yes, you can enlarge windows in a brick house. Your masonry contractor will need to cut away exterior brick to make space for the larger window, and you may also need to consult a structural engineer to make sure the window is properly supported inside the frame of the house.

Removing paint from brick can have both aesthetic and practical value. Some people prefer the timeless look of bare brick, making it worthwhile to remove old paint layers. Brick also lasts longer when unpainted, as paint traps moisture, causing the brick to deteriorate more quickly. If your brick walls are already in bad shape, stripping the paint off might do more harm than good.

Painted exterior brick does not usually need sealing. Brick is a porous material, so you don’t want to apply a sealant that could trap moisture inside the bricks and cause erosion and structural damage. The risk of moisture-induced damage after sealing is higher in colder climates where trapped moisture can expand if it freezes. On the other hand, it makes sense to seal really old brick or kitchen backsplashes, where moisture from cooking can weaken the brick.

The Steele, ND homeowners’ guide to masonry services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"