Get matched with top above ground pool installation pros in Cooperstown, ND

An easy way to know whether your sand filter has enough sand is to check how full the filter is and what the sand looks and feels like. The filter container should be two-thirds to three-quarters full of sand. Look for interior marks indicating the ideal sand level. If you put your hand into the sand, it should flow through your fingers without clumping. The filter pressure gauge is also an easy indicator—the right amount of sand leads to normal pressure, while too much or too little sand can cause high or low pressure.

The average pool size in gallons is 15,360. This number is for a 16’ x 32’ pool with a four-foot depth. However, many pools have different depths at each end or irregular sizes, so you may need to use the formulas above to calculate exactly how many gallons of water you need.

When designing your dream pool, it's important to leave enough room for safe walkways, patios, and extras such as outdoor kitchens and fire pits. Your local building codes may specify the minimum space between your pool and your house, utility lines, and property line. In most cases, the area of the patio around the pool should be equal to or greater than the surface area of the pool.

Any number between 7.2 and 7.8 is an ideal pH for swimming pools or 80 to 120 ppm. Your pool testing kit should be able to measure both of these numbers. If your pool’s pH is below this range, the water is too acidic and can cause scaling and damage to pool equipment. If the water’s pH is above this range, it can decrease the effectiveness of necessary chemicals, like chlorine.