Get matched with top locksmiths in Pleasant Garden, NC

Rekeying your own locks is a low-cost task that prevents you from having to replace the locks themselves completely. The first couple of times you rekey a lock may be challenging because this is an intermediate DIY task. You can purchase a rekey kit from most hardware stores, but make sure you’re buying the kit from the brand of lock in your home that you’re going to rekey. 

Expect to pay between $50 to $200 if you hire a locksmith to change your locks. That figure includes labor and the cost of basic hardware. The cost will naturally be higher if you plan to install more expensive locks, like smart locks, and if you need a lot of them.

Homeowners can save money by replacing locks themselves. A typical rekeying kit costs about $10 to $25. The only additional cost is purchasing new house keys, and those are no more than a few dollars per key. If you want to replace the locks on your own completely, the main cost is the price of the locks themselves. A standard knob-style lock starts around $25, while electronic locks and smart locks will run in the hundreds of dollars. The only additional tools you should need are a tape measure, screwdriver, and screws if they are not already provided.

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.

There are several ways to add security to a sliding glass door. To start, install a rod or deadbolt lock instead of the flip-lock that comes standard with most sliding glass doors. Add a sensor to the door and monitor any activity through your home security system.

Finally, installing shatterproof window film will help keep the structural integrity of the glass if it cracks.