Get matched with top concrete resurfacing pros in Gates, NC

Concrete resurfacing is the process of applying a new, thin layer of concrete over an existing concrete slab to enhance its appearance and durability. The terms 'concrete resurfacing' and 'concrete overlay' are often used interchangeably, though the exact meaning can vary between contractors. Generally, both refer to applying a layer of pre-blended concrete, typically between 1/4-inch and 1-inch thick. Some contractors may use 'overlay' to describe a thicker application that adds structural integrity, while 'resurfacing' might refer to a thinner, more cosmetic layer. This process is a cost-effective alternative to completely replacing the concrete, as it uses significantly less material than pouring a new 4-inch slab. Resurfacing also provides an opportunity to add new colors or stamped textures. Other names for this process include concrete restoration, concrete refinishing, and concrete rejuvenation.

If your cement garage floor is sinking and cracking, your first step should be to call a local structural engineer to assess the problem. They can determine if it’s a minor amount of sinking related to normal settlement or if the issue is structural in nature. If you do have structural damage, the engineer or a foundation repair company that you hire will come up with a plan to fix the issue, which often consists of mudjacking for less severe issues or underpinning for more extensive problems.

The average cost to repair a concrete driveway ranges from approximately $830 to $2,800, with a typical project costing around $1,765. The price varies widely depending on the type and extent of the damage. Minor crack repairs can be as low as $0.10 to $0.15 per linear foot and may be a DIY project. More significant repairs are priced per square foot: replacing a damaged slab costs about $6 to $14, while raising or leveling sunken concrete costs $3 to $25. Resurfacing is another option, costing around $3 to $5 per square foot. Factors influencing the total price include the size of the affected area, whether reinforcement is needed, and labor costs.

If your concrete steps have crumbled or chipped, you can fix them by removing any chips or flakes, cleaning and wetting the affected area, applying a concrete bonding agent, and finally applying new concrete, usually in the form of Portland cement. For widespread damage, you can consider concrete resurfacing instead. For fixing concrete spalling that has led to deep damage, you might need to remove damaged material, add structural supports, and pour new concrete into a mold.