Get matched with top epoxy flooring pros in Boone, NC

To improve the appearance of concrete steps, you can repair any damage, refresh the surface, and add decorative elements. For crumbling, chipping, or broken sections, consider concrete resurfacing or light repair. If the surface is intact but discolored, applying a coat of paint, stain, or concrete sealer can refresh its look; reapplying a sealer every one to two years is recommended for maintenance. For a quick enhancement, you can also add decorative items like potted plants, garden statues, lanterns, or decorative railings to spruce up the area.

The cost to seal concrete is around $1,500 on average, but you could spend anywhere from $1,000 to $7,000, depending on the type of sealer used and the size of the space. You may want to seal concrete that receives a large amount of foot traffic or heavy wear. While you can seal concrete yourself with materials from a home improvement store, you must ensure the surface is clean and ready to accept the sealer. Hiring a professional is often recommended to ensure good, even coverage that provides adequate protection.

Epoxy and polyurethane sealers can last five to 10 years, while acrylic sealers last two to three years or more depending on the use, wear of the surface, and type of sealer you choose. Areas that see heavy traffic or extreme ice and snow may require more frequent sealing. Test your concrete every two years to gauge how it responds to absorbing water or if it fully repels it for longer than 20 seconds.

Yes, you can seal old concrete, but proper preparation is essential. Before sealing, ensure the concrete is clean, dry, and free of any old sealant. To check if resealing is necessary, place a few drops of water on the surface; if they are absorbed in less than five minutes, it's time to reseal. If you are using the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are applying a different type of sealer, the existing one must be removed. Additionally, repair or fill any cracks to create a smooth base before you begin sealing.