Get matched with top countertop and backsplash pros in Ash, NC

Yes, you can install a farmhouse sink on an existing countertop—but there are some caveats. You’ll need to precisely measure. It’s best to choose a sink that’s the same dimensions as your existing sink, since your contractor won’t have to cut the countertop. Otherwise, pay close attention to the depth of your counter (the front to back measurement). You don’t want to install something that’s so big it sticks out beyond your countertop and cabinetry.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

If you want your butcher countertops to last the typical 20 years, you should seal them monthly. Most homeowners use either oil or polyurethane, which helps repel water from the porous material. Keep in mind that if your countertops are in a kitchen, you’ll want to use a food-grade sealant. Tung oil, mineral oil, and beeswax are all popular options.

The average cost to install or replace countertops is $3,105, with most projects falling between $1,858 and $4,177. However, the total price can range from $400 to $8,500 depending on several key factors. The most influential cost factors include the countertop material, the size in square feet, the quality of the new countertops, and the complexity of the job, such as the number of sink cutouts, corners, and special edging. Other considerations are the accessibility of the installation area and whether the project includes the removal and disposal of your old countertops. You have a wide array of material options to choose from. Laminate is generally the most budget-friendly, costing between $8 and $27 per square foot. On the higher end, slate countertops range from $30 to $90 per square foot. Other popular materials with varying price points include butcher block, quartz, granite, stainless steel, Corian, and wood.