Get matched with top fireplace pros in Ashland, MT

The time required for a chimney inspection depends on the inspection level. A Level 1 inspection typically takes between 45 minutes and two hours, with an average of about an hour and a half. A Level 2 inspection usually takes less than two hours. A more in-depth Level 3 inspection can take up to five hours, or even multiple days if it requires removing materials. The total duration also depends on the chimney's size, condition, and how long it has been since its last inspection; chimneys with severe damage will require a longer inspection.

You can let a fire burn out in a fireplace as long as you or someone else will stick around to monitor it until it goes completely out. This may take several hours. To prepare, stop adding fuel to the fire well before you’re ready to call it a night. If you’re using the fireplace for warmth, you’ll want to cover up in some blankets as the flame dies down.

While hardwoods are the best woods to burn, a few types of woods should be avoided when burning. Wood that has not had time to season, or “green wood,” should be avoided. The extra water in the wood makes it smoke horribly, which is not a quality you want. Additionally, it’s best to avoid any wood that is manufactured or has been treated, including coated or sealed wood, painted wood, or pressure-treated wood. These woods have chemicals that will be released into your air when burned and can cause health problems.

Most projects take 5-10 days, including foundation work, masonry, and finishing.