Get matched with top masons in Verona, MS

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.

Staining or painting brick isn’t something to do on a whim. Make sure you really want to live with stained brick, because once you apply the stain, it’s permanent. Sure, it will fade over time, but you can’t restore the brick to its natural tones after applying a stain or paint.

Cobblestone fell out of favor with the advent of motor vehicles. Asphalt and concrete are both much smoother surfaces allowing for a smoother ride. Asphalt is also much cheaper, especially for driveways. However, we didn’t stop using cobblestone altogether, and you can still see it as a decorative option in both homes, in parks, and in pedestrianized areas of cities.

When painting brick, each application method has distinct advantages and disadvantages. Spraying is significantly faster but may not penetrate deeply beyond the surface layer. Rolling is effective for working paint into the brick's texture but can be less effective on mortar joints. If you opt for a roller, choose a thick nap of at least a half-inch to ensure paint gets into all the crevices for even coverage. Using a brush is generally not recommended as it is very time-consuming and provides poor surface penetration. Ultimately, a combination of spraying followed by back-rolling is often the best strategy for a durable and even finish.