Get matched with top masons in Shannon, MS

Yes, you can limewash surfaces other than brick. Plaster, stone, stucco, and concrete can all also be limewashed. Any porous surface that will absorb the wash is a good candidate for limewash, although it won’t help much with waterproofing. If you choose to limewash over paint, you’ll need to prep before applying it to avoid a powdery, chalky finish. Shiny surfaces like metal or glass can’t absorb limewash, so it’s not suited for these.

Rock salt and ice melts contain sodium chloride, aka salt, and are corrosive to metal and concrete. If used frequently over time, it can cause corrosion, discoloration, chipping, and cracking to patios, walkways, and driveways. You can try a rock salt alternative or hire a professional snow removal company instead. 

You will repoint over a fraction of the old mortar, but you should scrape away 1/2 to 1 inch of mortar from the joints before repointing. Otherwise, the repointing is only masking the weakened mortar instead of actually replacing it, which could put your chimney at risk of bigger, more expensive damages later on.

Yes, it is usually possible to repair a damaged brick mailbox. A professional brick mason or masonry contractor can perform the repairs. They can assess the damage, provide an estimate, and help you determine if the repair is worthwhile based on the mailbox's value and the extent of the damage. The repair process may involve sourcing replacement bricks and mortar. Damaged bricks can be cut out and replaced, or the mortar joints can be cut out and retucked. It's important to note that the new mortar may differ in color from the original. If the mailbox insert itself is damaged, it can typically be cut out and replaced as well. If your brick mailbox has been completely destroyed, you should check with your local building code enforcement office before rebuilding, as some areas do not allow brick mailboxes due to the potential hazard they pose to drivers.