Get matched with top affordable plumbers in Rolling Fork, MS

If you can’t unscrew your bathtub drain, it could be due to stripped post threads. The best way to handle this is to pull the stopper up while turning it. Eventually, you should see a screw set that you can loosen with a flathead screwdriver to remove the bathtub drain.

Yes, an ambitious homeowner could decide to replace their own toilet. A person attempting to do a DIY toilet installation should keep in mind that the average toilet weighs between 100 and 120 pounds. That means that you'll need to be comfortable lifting and carrying your old toilet and replacement toilet during both phases of the project. Additionally, homeowners will need to have basic plumbing knowledge to avoid plumbing problems that could result in messy, expensive water damage in their bathrooms. Hiring a plumbing pro from the get-go can help you avoid damaging your plumbing or your new toilet.

Yes, you can pour water down the toilet to help it flush. For each flush, you’ll need 1 to 2 gallons of water for newer toilets or 3 to 5 gallons of water for older toilets. Rather than dumping the entire bucket in all at once, pour the water in slowly for the best results. If you’re pouring water down the toilet to help it flush after a clog, only use 1 gallon of hot water.

Adding plumbing to a detached garage or shed can increase the value of your house, especially if the garage is properly insulated, conditioned, and finished so that it can serve as additional living space—as a rental property, for guests, or as an in-law suite. However, it’s unlikely that the cost to add plumbing to a detached garage will increase the property value enough to recoup your investment (and don’t forget: you’ll likely see increased property taxes after the renovation).