Get matched with top paving pros in Renova, MS

Installing a heated driveway is often worth the cost because it will significantly boost a home's value, especially in areas that often suffer from heavy snow and freezing temperatures. Even if you only install the basic components and never activate the heating system yourself, giving the future buyer an option to finish the system can still increase your home’s value.

Wet cutting is usually the preferred method. It controls dust, which helps protect your lungs and makes for a cleaner working environment. Plus, the water cools the blade, preventing overheating and prolonging its life while providing smoother, more precise cuts. The downside is the mess—water and asphalt sludge can be messy to clean. Dry cutting, though convenient if water isn’t available, creates a lot of dust, which can be harmful. This also increases the risk of blade damage due to overheating. So, if you have the option, wet cutting is the better method for most asphalt jobs.

The lifespan of pavers varies based on many factors. Material is the key component, with concrete, stone, and brick pavers lasting up to 100 years, while clay pavers usually only last around 25 years. To maximize your pavers’ lifespan, you should keep your paver patio or walkway clean, add sealant every few years, and keep the joints sealed with polymeric sand as needed.

Driveways should be sloped with a minimum 2% slope—anything lower will cause precipitation and runoff to collect. A 2% slope is the equivalent of a 2-foot rise over 100 feet. One quick way to check the integrity of your driveway’s slope: no more than four inches of water should collect on the surface longer than 15 minutes after rain.