Get matched with top toilet pros in Mendenhall, MS

Yes, you should screw your flange to the subfloor, including cement. The best way to get this done is to predrill holes into the concrete using a hammer drill and a ¼-inch concrete bit. Be careful when you’re ready to bolt your flange down, as you can accidentally crack it. You can avoid this issue by not installing the screws too deep. Or, you can opt for a flange with a stainless steel ring so you don’t have to worry about cracking the plastic.

If you know the job is going to be extensive (and you don’t like surprises), hiring a Roto-Rooter specialist may make sense for you. You’ll know how much you’re going to pay right away.

That said, hiring the best plumber isn’t solely about price. If you've worked with a plumber you trust before or have a list of plumbing services you need tackled at your home, working with a plumber might be a better choice for you.

If you’ve accessed the bolts and nuts that hold your toilet seat in place and can’t unscrew them, it’s possible that they were overtightened or that the material corroded over time, making it impossible to unscrew. If that’s the case, you can either call in a plumber for help, or you can DIY a solution if you’re careful. Lay down masking tape around the mounting bracket and then use the tape as a surface to lay a hack saw blade. Move slowly to cut through the bracket and bolt, being careful not to damage the porcelain in the process.

Hiring an emergency plumber is expensive because of the urgency and inconvenience, but there are a few things you can do to help keep costs down:

• Minimize water damage by shutting off your water main 

• Clean up pooling water immediately to reduce damage and mold growth

• Avoid using fixtures if you have a clog or septic system backup

• Verify that your plumber is licensed before hiring

• Call a few plumbers for estimates if you can afford a short delay in getting service