Get matched with top door pros in Mendenhall, MS

You will need to modify an existing door to use it as a barn door for a number of reasons. For example, a barn door sits on a track several inches off the ground. An existing panel door will hover above the ground. A door that is slightly wider than the door opening is also ideal for the barn style.

Door jammers are designed for easy installation and portability. You can use them at home or while traveling if you’re looking for added security. Slide the foot under the door, then turn the bolt to tighten until it is fitted to the door. Look for options with a padded, adjustable foot to fit tricky door edges and avoid damage.

To build a standard size, six-panel door yourself, you’ll need four 2-foot by 6-foot boards, one 2-foot by 8-foot or 2-foot by 10-foot board, and a sheet of 3/4-inch, paint-grade plywood. The 2-foot by 6-foot boards will serve as your stiles, top rail, and horizontal and vertical mullions, and the wider board will serve as the bottom rail, which is usually wider than the other horizontal pieces. The plywood will serve as the panels, but you’ll need around five 1-foot by 6-foot boards to make your own panels if you want to stain the door rather than paint it.

This hack required some hand strength. First, bend the fork's tines. Next, slip the pointed ends into the door latch and close the door. Open the door to remove the fork and break off the fork's handle. Reinsert the fork's head into the door latch and close the door. Finally, slide the fork's handle through the tines, creating a horizontal barrier that prevents the door from opening inward.