Get matched with top drain cleaners in Kiln, MS

Several signs can tip you off to a clogged dishwasher drain. At first, you may notice that it’s taking longer than usual for the dishwasher to drain, or you may hear gurgling sounds during the draining part of the cycle. You might also notice water backing up into your sink or excess food at the bottom of the dishwasher after a load. The most obvious sign, though, is seeing standing water at the bottom of your dishwasher after the cycle has finished.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Baking soda and vinegar is a great solution for cleaning your sink drain; in fact, it’s our preferred method. Here’s how to unclog your drain with baking soda and vinegar: Pour in a half cup of baking soda, then 1 cup of white vinegar, and let the two bubble for 15 minutes. Then rinse out with boiling water. This method is much safer than using a chemical drain cleaner gel.

It’s sometimes difficult to distinguish a clog from a frozen drainpipe since ice technically causes a clog. If the temperature doesn’t tip you off, there are a few additional signs that your pipe is frozen. Look for condensation and frost around the pipes. Ice in pipes can cause a banging or clanking noise as opposed to a clog from a softer material.