Top-rated electricians.

Best electricians near Houston, MS

Enter your zip and get matched with up to 5 pros

Need a pro for your electrical service project in Houston, MS?

Select your specific project to find the pro for you.

Top-Rated Electricians in Houston - Updated Nov 2026

Avatar for Neli Virtual Appliance Repair
Neli Virtual Appliance Repair
4.2(
682
)
Appliance (Major Electric Appliance) - Install or Replace

Serving Houston, MS and surrounding areas

Approved

In business since 2016

Free estimates

Warranties offered

"The problem turned out to be a burned out small electric door switch. I believe the price was way too expensive for the service performed and the price of the door switch. What more can I say? It got done."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Response time1 day
1 neighbors recently requested a quote
Recommended by86%of homeowners
...
Showing 1-10 of 114
Electrical FAQs, answered by experts

Wiring an outlet can be done safely by someone with the proper knowledge and tools, but it can also be dangerous if not done correctly. If you're not comfortable working with electrical systems, it's best to hire a licensed electrician to do the job for you. That way, you can rest assured that your outlet will be rewired safely and quickly. 

Black is the standard color for hot wires, which transfer electricity to your outlets and switches. Red wires are also hot wires. White (and sometimes gray) wires are considered neutral, delivering power back to the panel. Finally, green wires, which are sometimes bare copper, are ground wires, used to ground an electrical circuit and prevent electrocution.

Most 200-amp panels have 40 to 42 slots, which can accommodate 40-42 single-pole breakers or 20 double-pole breakers. Some panels can accept even more circuits through the use of tandem breakers. The exact number of breakers allowed is determined by the panel manufacturer's rating, which you can find on the panel itself. It is important to avoid using all breakers at the same time; as a general rule, you should not use more than 160 amps of power at once to prevent overloading your 200-amp system. For specific guidance, it's best to check your panel's rating or consult with a qualified electrician.

A sump pump can be plugged into a regular, 110-volt outlet with three-prong openings, but it must have GFCI protections per the NEC, meaning you’ll need a GFCI outlet and circuit. Sump pumps require two outlet openings, one for the plug to the motor and one for the float switch.

Aluminum wiring can pose a significant fire risk because it tends to expand, contract, and overheat, leading to failing connections and splices. If your home has aluminum wiring, it doesn't always require a complete replacement, but you must take safety precautions. The first step is to hire a licensed electrician to conduct a thorough inspection. Based on their findings, you have several options:

  • Full Replacement: The safest but most expensive solution is to replace all aluminum wiring with copper.

  • Copper Pigtailing: A more budget-friendly option, suitable for certain homes, involves adding a short section of copper wire to the end of each aluminum wire at connection points.

  • Other Safety Upgrades: Your electrician may also recommend installing aluminum-compatible outlets and applying an anti-oxidant paste to connections to prevent corrosion.

Consulting a professional will help you determine the best course of action to ensure your home's wiring meets current safety standards.

The Houston, MS homeowners’ guide to electrical services

From average costs to expert advice, get all the answers you need to get your job done.