Top-rated concrete driveway pros.

Get matched with top concrete driveway pros in Flowood, MS

Enter your zip and get matched with up to 5 pros

Need a pro for your concrete driveway service project in Flowood, MS?

Select your specific project to find the pro for you.

Find Concrete driveway pros in Flowood

Fairley Premier Concrete
3.9(
15
)

Serving Flowood, MS and surrounding areas

Free estimates

"Not very professional. They didn’t have any equipment; I ended up renting all the equipment on my credit card. At first the wrong equipment was ordered so I ended up paying for a bigger machine. I was charged for an extra day from what I was told. I also ordered concrete for the driveway. He used the machine and the some of the concrete I ordered to fix my neighbor’s entrance way; before he poured my driveway. Also I wasn’t given the information I couldn’t drive on it for 5 days until after they finished. My credit card was charged a couple of months after the job was done. (I did get this straighten out) I paid about $2500.00 over the estimate. The finished product do look good, besides the fact that they tore up my lawn."
Concrete - Pouring & Repair Project
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+9

Response time3 days
Response rate100%
Recommended by71%of homeowners
...
Showing 1-10 of 135
Concrete Driveways questions, answered by experts

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

  • Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

  • Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

  • Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

  • Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

  • Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

Some homeowners have luck using pressure washers, but this only works for old or weaker concrete sealants and with very powerful pressure washers. You’ll get better results by pressure washing water-based sealants. However, it’s worth trying on any sealant if you’re hoping for the least toxic, least expensive, and most DIY-friendly option. To try this method, rent or buy the most powerful pressure washer you can find and take several passes at the concrete, completely pressure washing the entire area. You may need to repeat the process multiple times to see results.

A pressure washer’s size or power is measured in pounds per square inch (PSI). The amount of pressure you need will depend on your project and the material you’re washing, but consumer pressure washers range from 500 to 2,400 PSI. Porous materials like brick and stucco should not be blasted with anything stronger than 1,000 PSI, while you can use a PSI of up to 2,400 to clean a vinyl fence.

Concrete does well with a number of cleaning agents, as it’s a durable material. Choose from acidic cleaners, alkaline cleaners, and pH-neutral cleaners, in addition to antibacterial solutions. Your best bet is to simply read the fine print with your preferred detergent and make sure it mentions concrete as a viable surface. 

Yes, you can remove oil stains from your driveway by applying an absorbent material such as baking soda, sawdust, or cat litter, pouring on a liquid detergent such as dish soap, scrubbing the area, and rinsing with water. You can also use a diluted bleach solution, white vinegar, or TSP solution on concrete.

The Flowood, MS homeowners’ guide to concrete driveway services

From average costs to expert advice, get all the answers you need to get your job done.