Best epoxy flooring pros near De Kalb, MS

Yes, you can seal old concrete, but proper preparation is essential. Before sealing, ensure the concrete is clean, dry, and free of any old sealant. To check if resealing is necessary, place a few drops of water on the surface; if they are absorbed in less than five minutes, it's time to reseal. If you are using the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are applying a different type of sealer, the existing one must be removed. Additionally, repair or fill any cracks to create a smooth base before you begin sealing.

When properly installed and maintained, concrete floors can last from 50 to 75 years or more. The longevity depends heavily on the finish and maintenance routine. For example, polished concrete floors can last 50 years or longer but require periodic refinishing or resealing every 5 to 20 years, depending on foot traffic. To maximize the lifespan of any concrete floor, it's crucial to have it installed by a licensed professional, ensure it is properly sealed to prevent damage, and perform annual deep cleanings.

The prevention steps are essentially the same, no matter the patio material. Keep the surface clean and maintained. Ensure there's no debris buildup, and cover the whole thing in a quality sealant. If it's the start of a season or it's been a while since you've cleaned the area, use a pressure washer.

Mix the resurfacer into a sticky mixture. The consistency should look like mashed potatoes. Use a squeegee to push the resurfacer across the pitted area and smoothen the surface with a cement trowel flush. Make sure you protect any expansion joints with a weather strip. Alternatively, cut out any resurfacer that touched the joint once the mixture begins to harden.