Get matched with top stone countertop pros in Boyle, MS

Marble is a porous natural stone that needs sealant to minimize staining. Leaving this type of countertop material sealant-free means any liquids left on the surface will quickly absorb into the stone, discoloring it and dulling the sheen. Dark or acidic liquids, like red wine, coffee, and lemon, are the worst culprits. 

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The cost to install a kitchen island ranges from $900 to $6,500, with an average price of around $4,800. The final cost depends on whether you buy a prefabricated unit or have one custom-built. Prefabricated kitchen islands are generally cheaper. A simple prefabricated cart can cost between $150 and $900, while a permanent, stationary prefabricated island costs from $900 to $5,000. A custom-built kitchen island averages around $4,800 but can cost $10,000 or more depending on factors like materials, size, design complexity, and accessibility.

There are several significant differences between laminate and quartz countertops. Quartz is much pricier than laminate but can last for decades, while laminate lasts around 15 years. Laminate can’t be repaired or resealed and is easier to damage than quartz, which can be repaired. Both quartz and laminate are prone to heat damage. Usually, the choice comes down to your budget.