Best stone countertop pros near Shaw, MS

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

Yes, many services include the removal and disposal of old countertops. Confirm with your installer.

The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.

Engineered quartz is an artificial, nonporous material made from a mix of mined ground quartz, polymer resins, and pigments, making it a lower-maintenance option. In contrast, quartzite is a natural stone composed of sandstone, which makes it highly resistant to heat but often requires sealing and more careful upkeep. You should clean both types of stone with non-abrasive cleaners that have a low or neutral pH, avoiding acidic cleaners like vinegar, as well as wire brushes and scouring pads.