Get matched with top stone countertop pros in Sunflower, MS

Quartzite countertops are porous, meaning that liquids can seep into the stone and stain them. You’ll need to seal them before installing and resealing annually, depending on use and stone material. Sealing will help prevent stains and etching. On the other hand, you don’t need to seal quartz and other engineered stone countertops since they aren’t porous.

There are several countertop options available to fit your lifestyle and needs. 

• Granite countertops are durable and come in a variety of colors.

• Soapstone countertops are prone to scratches and best in smaller kitchens.

• Marble countertops are less durable than granite but a good option for busy kitchens.

• Slate countertops are stain-resistant, making them easy to clean.

• Limestone countertops must be sealed often to prevent scratches.

• Acrylic countertops cost less than granite while still providing durability.

• Laminate countertops are the most affordable but chip and fade faster.

• Wood countertops need monthly sealing to maintain.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Yes, but you will need the proper gas or electric lines running to the island. You will also need to factor in the costs of a range hood, also known as an extractor. There are several styles to choose from. An island extractor is a chimney-style range hood that hangs from the ceiling directly above your cooktop. A ceiling extractor fits flush into your ceiling above your cooktop, so it is less noticeable and allows for island extensions, such as hanging pot racks. 

For a completely unobtrusive hood, you can choose a downdraft extractor. It is built into the island and can be raised when needed. Its downside is that it takes up space in the island’s cabinets. A venting cooktop is built into the cooktop, and it too takes up cabinet space.