Best stone countertop pros near Dermott, AR

Clorox wipes contain bleach, which is unsafe for use on quartz countertops. When used over time, the bleach will damage the countertop surface and cause it to become discolored or damaged. Instead of Clorox wipes, use a pH-neutral multipurpose solution and clean the surface gently using a soft microfiber cloth.

The most expensive countertop materials are marble and granite. These natural materials are very heavy and require specialized tools and knowledge to install. Their natural veins and flecks elevate the design and make a beautiful statement in the kitchen or bathroom. Because they’re natural, no two countertops will be the same. 

No, you should not put a hot pan or pot directly on a quartz countertop. While quartz is generally heat-resistant, the resin binders used in its manufacturing are sensitive to extreme heat from items exceeding 150 degrees Fahrenheit. This can damage the resin, leading to discoloration, burns, or even cracking. To prevent permanent damage, always use trivets or hot pads for hot cookware.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.