Get matched with top locksmiths in Salisbury, MO

Lock bumping is a technique locksmiths use to quickly and quietly open a pin tumbler lock, typically found in most types of deadbolts. It involves inserting a specially crafted key, or bump key, into the lock and tapping or "bumping" it with a mallet or similar tool. The force applied causes the lock's pins to jump momentarily, allowing the lock to be turned and opened. Unfortunately, thieves also use this technique to break into homes. Luckily, products like a deadbolt strap will fortify your lock.

You may be able to get a broken key out of a lock by yourself, depending on the situation. If a portion of the key is still protruding from your lock, try lubricating the keyway and using pliers or even a bobby pin to pull the key out of the hole. If you have jigsaw blades handy, you can also try using those to grab onto the stuck key and pull it out. 

But, if neither option works or you can’t reach the key, your only option is to call a locksmith for help. 

When it comes to how to get a stuck key out of a lock, the simplest way is to use some kind of lubricating substance. One option is to apply graphite powder while wiggling the key gently. As the graphite fills the lock, jiggling should loosen the key enough to allow you to pull it out.

Expect to pay between $50 to $200 if you hire a locksmith to change your locks. That figure includes labor and the cost of basic hardware. The cost will naturally be higher if you plan to install more expensive locks, like smart locks, and if you need a lot of them.

Homeowners can save money by replacing locks themselves. A typical rekeying kit costs about $10 to $25. The only additional cost is purchasing new house keys, and those are no more than a few dollars per key. If you want to replace the locks on your own completely, the main cost is the price of the locks themselves. A standard knob-style lock starts around $25, while electronic locks and smart locks will run in the hundreds of dollars. The only additional tools you should need are a tape measure, screwdriver, and screws if they are not already provided.