Get matched with top dishwasher installation pros in Riverside, MO

The correct water temperature for your dishwasher depends on the washing phase. When water enters the machine, it should be around 120 degrees Fahrenheit, but no hotter than 150 degrees. During the wash cycle, the machine will heat the water to between 130 and 140 degrees. If your dishwasher has a sanitizing cycle, the water can reach a temperature of up to 180 degrees.

Not all dishwashers are 60cm wide, but that tends to be the most common size. 60cm translates into roughly 24 inches, with most home dishwashers being between 22 and 24 inches wide. There aren’t metrics available but it’s been our experience that over 90% of household dishwashers in North America are around 24 inches wide by 24 inches tall.

You should deep-clean your dishwasher every month for optimal performance. A simple scrub down using a homemade vinegar liquid solution is all you need, but don’t use cleaners that aren’t for dishwashers. 

If your dishwasher needs repair, expect to spend between $50 and $100 or $100 to $200 per hour to hire a dishwasher repair technician to service your machine.

Treat hard water with water treatment tablets to keep your dishes from getting spotty in between washes. Drop one of these into your dishwasher monthly and run a basic cycle with the machine empty.

A clogged air gap can cause a dishwasher not to drain. There are, however, other potential issues that can lead to improper drainage. For example, if you have attached the air gap to a garbage disposal and forgotten to remove the knockout plug, wastewater may backflow into the dishwasher. Check that the air gap is installed properly, and then look for clogs in the air gap and dishwasher filters.