Top-rated concrete driveway pros.

Best concrete driveway pros near Nixa, MO

Enter your zip and get matched with up to 5 pros

Need a pro for your concrete driveway service project in Nixa, MO?

Select your specific project to find the pro for you.

TRUSTED BY NIXA, MO HOMEOWNERS

  • Average homeowner rating star icon4.3
    Average homeowner rating
  • Verified reviews icon41
    Verified concrete driveway services reviews

Top-Rated Concrete driveway pros in Nixa - Updated Nov 2026

NB Paving
4.1(
155
)
Asphalt Paving - Install

Serving Nixa, MO and surrounding areas

Approved

In business since 1995

Free estimates

Warranties offered

"I recently had installed a hot-mix asphalt surface on my driveway. It encompassed approximately 550 feet in length. A good portion of that footage was a single 11-foot lane, but as it approached my home there is a circle drive with a landscaped area and differing widths of paving was needed, which required some rather intricate work. Also, part of the job encompassed paving up to the concrete area in front of my 3 car garage and to the sidewalk leading to the front of our home. Nelson Boswell and his crew of professional staff did an outstanding job of researching exactly what I was looking for, developed a plan for manicuring the existing gravel drive base, and applying the asphalt surface. They were extremely courteous, attentive to my needs above everything else, and did what they said they were going to do. They also were able to complete the whole project in a span of two days. At the end of the project, I thoroughly inspected the work, and do not have a single complaint. In fact, I would readily recommend them to anyone! Oh, and one other thing: they were very cognizant of my lawn and landscaping, going above and beyond to make sure nothing was disturbed."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+1

5 neighbors recently requested a quote
Recommended by86%of homeowners
...
Showing 1-10 of 132
Concrete Driveways FAQs, answered by experts

The ideal PSI (pounds per square inch) for a pressure washer depends on the surface you are cleaning. For general home use, a pressure washer with a range of 2,000 to 3,000 PSI is recommended and powerful enough for most residential projects.

The specific PSI you should use varies by task:

  • High-Pressure Tasks (2,500-3,000 PSI): Tough materials like concrete, stone, masonry, and brick can handle higher pressures. This is suitable for removing stubborn stains from driveways or cleaning graffiti.

  • Low-Pressure Tasks (around 600-1,300 PSI): Softer surfaces require a gentler touch to avoid damage. Use a low PSI setting for cleaning wood decks (especially softwoods like pine and cedar), vinyl siding, outdoor furniture, and stucco.

For best results, choose the right nozzle for your surface, such as a 15-degree nozzle for siding or a surface cleaner attachment for driveways. Using an extendable wand can also make the work easier and more ergonomic.

If your epoxy application ended up a bit messy and left spills behind, there are several ways to clean epoxy off of a concrete floor. You can use a power washer with at least 3,000 PSI. However, it may be easier to use a scraping tool or an acidic cleaner, like vinegar, to remove unwanted epoxy. 

If the entire floor has epoxy and you want to remove just excess epoxy stains, these methods could still strip parts of the epoxy floor. Move carefully and in small areas to minimize damage, or call a pro for an expert finish.

Yes, you can remove oil stains from your driveway by applying an absorbent material such as baking soda, sawdust, or cat litter, pouring on a liquid detergent such as dish soap, scrubbing the area, and rinsing with water. You can also use a diluted bleach solution, white vinegar, or TSP solution on concrete.

You can certainly utilize a pressure washer to effectively clean your garage floor. If you're dealing with oily residue, consider adding a degreaser to the pressure washer solution. Prior to using the pressure washer, make sure to thoroughly sweep the garage floor to eliminate any loose dirt or debris.

Begin the pressure washing process from the back of your garage, which is closest to your home, and work your way towards the front. This ensures that the water and dirt are directed outside. In case you've applied a cleanser or degreaser, it's a good idea to give the floor another pass with clean water using the pressure washer to ensure a thorough rinse.

To extend the lifespan of an asphalt surface, sealcoat it every 2-3 years, repair cracks promptly, and clean it regularly to remove debris.

The Nixa, MO homeowners’ guide to concrete driveway services

From average costs to expert advice, get all the answers you need to get your job done.