Get matched with top dishwasher installation pros in Lone Jack, MO

Yes, if your filter is damaged or simply too debris-filled to be of use, replace it with a new component. Check the instruction manual that accompanied the dishwasher for information as to the specific part. There are many online marketplaces that sell these parts, but perform due diligence to ensure you buy the right one.

To clean an old dishwasher without a filter, start by removing the bottom rack to access the drain area. Use a damp cloth or sponge to wipe down the interior, paying special attention to the corners and crevices where food particles and debris can build up. Pour a cup of white vinegar into a dishwasher-safe bowl and place it on the top rack, then run a hot water cycle to help break down grease and grime. After the cycle, sprinkle a cup of baking soda across the bottom of the dishwasher and run a short hot water cycle to deodorize and further clean the interior. 

Most dishwashers are designed with a standardized width of around 24 inches and can fit into most kitchen spaces intended for dishwashers. However, the height and depth might vary slightly, requiring careful measurements to ensure a proper fit. Certain specialized or compact dishwasher models might deviate from the standard size to accommodate specific needs or non-standard spaces. While many dishwashers adhere to a typical size, measuring the available space accurately is crucial to guarantee a seamless installation.

Dishwashers should be cleaned a minimum of once every 3 months, but really it should be done monthly. This is to prevent germ buildup and will help keep your machine running smoothly. Dishwasher maintenance isn’t too difficult, you’ll simply clean the filter, wipe down the spray arms with vinegar or rubbing alcohol, and run the cycle on empty. If there is any debris, you can remove it with a small metal pick. Do not use wood as the tip can break off inside the machine.