Best masons near Lebanon, MO

No, it’s not recommended to attach shutters to brick without drilling. Brick is dense and built to last, so adhesives and shortcut methods don’t usually cut it. Even heavy-duty glue struggles to hold up over time—especially against wind, moisture, and temperature changes. Most no-drill options are made for materials like vinyl or wood, not solid masonry. Skipping the drill might seem easier, but it puts your shutters—and anything below them—at risk. For a secure, lasting install, drilling is the way to go. It takes more effort up front, but the result is safer and more reliable.

For most brick cleaning jobs, including fireplace bricks, use a masonry sponge and a gentle cleaner. A simple solution of equal parts water and vinegar, or a few drops of dish soap in a bowl of water, can effectively remove grime. For tougher stains, you can use a dedicated masonry or fireplace cleaner. It is crucial to wet the bricks thoroughly with water before applying any cleaning solution to prevent the brick from absorbing it, and to rinse the surface completely afterward. Harsher cleaners containing bleach or ammonia should only be used as a last resort, and they should never be mixed together.

Yes, you can paint stone on the exterior of a house. It’s important to properly prep the stone by cleaning off dirt and debris. You’ll want to apply at least two coats of paint to get the most even and complete coverage. Any pinholes or missed spots, however small, can allow moisture to get into the masonry and potentially cause the paint to blister and peel from the stone.

Two types of masonry are veneer masonry and solid masonry. Veneer masonry is thin brick or stone material attached to the face of a building. With veneer masonry, the walls support the weight of the masonry products rather than the masonry being built on a concrete footing. Solid masonry is a wall or other brick or stone structure built on a concrete footing, and the masonry supports itself.