Top-rated deck maintenance specialists.

Get matched with top deck maintenance specialists in Jefferson City, MO

Enter your zip and get matched with up to 5 pros

Need a pro for your deck maintenance project in Jefferson City, MO?

Select your specific project to find the pro for you.

Find Deck maintenance specialists in Jefferson City

Avatar for AAA Maintenance and Remodeling, LLC
AAA Maintenance and Remodeling, LLC
5.0(
11
)
Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Jefferson City, MO and surrounding areas

Approved

Super Service Award Winner

In business since 2025

Free estimates

Offers commercial services

"AAA Maintenance and Remodeling is outstanding. Andy replaced my hand railing on porch and replaced a few panels that were weathered. Made it look brand new . He power washed my driveway and house . He was always on time and respectful. Very clean and professional, I recommend highly ."
Ozarks
Shed before
Shed after
Deck repair
stair stringer

+4

Response time1 day
Response rate92%
Team Thompson Trades
New to Angi
Deck, Fence, Patio or Porch - Clean and Seal

Serving Jefferson City, MO and surrounding areas

Approved

Free estimates

Small jobs welcome

Hello, I am a recently retired educator and coach. I learned building trades from my father as a child and worked with him in construction for 8 years building houses from the ground up including plumbing, wiring, concrete, cabinetry, etc. from framing to finish. I have completed my own additions, remodeling, and repairs for the last 30 years. I'm a detail oriented perfectionist that enjoys working with my hands and providing a quality, reasonably priced service.

Bathroom
Bathroom
Bar area
Recreation area
Bedroom

+2

...
Showing 1-10 of 59
Deck Maintenance questions, answered by experts

Most building codes require that railing spindles (also known as balusters) on decks or stairs be spaced no more than four inches apart. This safety standard is often called the '4-inch sphere rule,' which means a sphere with a 4-inch diameter should not be able to pass through the opening between balusters. This rule is in place to prevent small children and pets from slipping through the railing. For the same reason, the space between the bottom rail and the deck or floor surface should also be no more than four inches. As a general guideline, professionals often install three balusters per foot of railing. However, since specific requirements can vary by location, it is essential to check your local building codes to ensure compliance before starting your project.

There are approximately 5.33 board feet in a 2x4. You can use the board foot calculator in this article to easily find the answer. A 2x4 is 2 inches of thickness by 4 inches of width, so you need to find the length, with 8 feet being the most common. You’d use the calculator here to multiply 2 times 4 times 8, and then divide by 12, arriving at a total of 5.33 board feet. 

No, you don’t need a permit to repair and replace a few boards on an existing deck. However, if you’re making structural changes to the deck or tearing down the old one and building a new one, you will likely need a permit. Check with your local municipality for the regulations and rules in your area, or ask a local contractor who builds decks for advice.

Yes, snow should be removed from a deck to protect it from damage caused by moisture and heavy loads. Shovel the snow off of your deck regularly once it is more than four inches deep. Avoid using salt, which can damage your deck.

Deck boards should be spaced no more than three-eighths of an inch apart. This is enough space to allow water and small debris to pass through without collecting on the surface, but not enough to create a tripping hazard. Certain materials, like pressure-treated wood, shrink over time, so they may need less space at installation.

The Jefferson City, MO homeowners’ guide to deck maintenance services

From average costs to expert advice, get all the answers you need to get your job done.