Get matched with top arborists in Green Ridge, MO

Removing tree stumps is a dangerous and complex job that requires a high level of expertise. Many landscapers specialize in general lawn care and maintenance. But, some may have the proper licensing and qualifications needed to safely remove tree stumps. In most cases, though, landscapers will refer you to a local tree removal or stump grinding company.

It is possible to cut down a tree on your property yourself, but it is generally not recommended unless specific conditions are met. You should only consider this project if the tree is small (e.g., under 4-5 inches in diameter and short enough that you don't need a ladder to reach the branches), and you are experienced in handling a chainsaw. The tree must also be located far from any power lines, fences, homes, or other structures. Even for small trees, the work can be dangerous, and it's always advisable to have a spotter to ensure the tree falls correctly and no branches fall on you.

For any tree that is large, requires a ladder to access, or is near electrical lines or structures, you should always hire a professional. Attempting to remove a large tree yourself is extremely dangerous, poses a risk of serious injury, and could result in significant damage to your property.

Before any tree removal, it's also important to check your local and state regulations to ensure the tree is not historic or otherwise protected by your city.

You can hire a professional arborist or tree removal service to cut down a tree to ensure safety, prevent property damage, and comply with all the local regulations. It’s highly advisable to always hire a professional, as tree removal can be extremely dangerous, especially for large or damaged trees. Certified arborists or tree removal experts have the proper equipment, training, and insurance to do the job safely and efficiently. They can also handle cleanup, stump removal, and obtaining the necessary permits.

For safety reasons, leaning trees are best removed by a professional, as they may often tear away from the hinge, causing you to lose control over where the tree falls. If you choose to cut down a tree leaning slightly, avoid cutting off root protrusions before you start. Make your hinge a little longer than usual by cutting it deeper (up to 30% of the diameter) and applying a wedge into the felling cut on the side the tree is leaning. Stand away from the direction the tree leans while making your felling cut.