Get matched with top interior painters in Brookfield, MO

There are times when you should remove all exterior paint before repainting. This includes when you need to get rid of lead-based paint (which should be done by a pro), or if you need to apply a different finish than what’s already there. Your house may also have too many pre-existing layers of old paint, in which case you’ll be better off getting rid of the old layers first.

When a window is painted shut, this means that paint has gotten into the cracks when window sashes or window frames were being painted. It’s pretty easy for this sort of thing to happen while painting, but sometimes homeowners will use paint to seal drafty windows, which will often cause them to get stuck shut.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

Professionals may use a variety of methods to remove old paint from surfaces, often depending on the size and complexity of the surface. Paint scraping in combination with a chemical paint stripper is the most common method, but experts might also use heat or steam to loosen everything before peeling the paint off. Some might just sand off the old paint if the surface is relatively flat and easily accessible.