Get matched with top interior painters in Affton, MO

Most spray paints are oil-based, meaning you will need a solvent to dissolve them, like paint thinner, lacquer thinner, or acetone. While solvents can be useful in removing paint, they are also very flammable and require the use of a respirator. Beyond that, these products may smear paint and cannot be used on all surfaces.

Yes, you can paint over old exterior paint, but success depends on the condition of the existing paint and proper surface preparation. If the previous coating is in good shape (not cracked, peeling, or flaky), you can paint over it with less prep work. However, for the most durable and professional-looking results, follow these key preparation steps:

• Clean the Surface: Thoroughly clean the exterior to remove all dirt, grime, and mildew. A pressure washer can be very effective for this.

• Scrape and Sand: If the old paint is peeling, cracked, or flaky, you must scrape off all loose paint. After scraping, sand the surface to create a smooth, even base for the new paint. Sanding is especially important for wood siding.

• Apply Primer: Using a quality exterior primer is highly recommended. It ensures the new paint adheres properly, improves durability, and provides a uniform finish. If you are painting a lighter color over a dark one, a tinted primer will help cover the old color more effectively.

Some brands offer paint-and-primer-in-one products for convenience. Taking the time to prepare the surface properly will not only increase your home's curb appeal but also help protect your siding and extend its life.

If the lead paint is in a place that is not easily disturbed and is not flaking or deteriorating, you do not necessarily need to remove it. Lead is toxic when dust particles or flakes from peeling lead paint are ingested. If people are not in the area with the lead paint, it may be safe to leave it in place. You still may want to consider encapsulation with a paint formulated for covering lead-based paint, just for an added layer of protection.

Penetrating sealer seeps into concrete pores to protect it from moisture and staining, cracking, and mold caused by water. This means you cannot remove penetrating sealers like topical sealers. The good news is that penetrating sealant doesn’t have to be removed before resealing, as most topical sealers must. Instead, you’ll want to buy a compatible penetrating sealant (often the same kind already in the concrete) and apply it. Always follow the manufacturer’s instructions.