Get matched with top drain cleaners in Minnetrista, MN

Yes, you can pour water down the toilet to help it flush. For each flush, you’ll need 1 to 2 gallons of water for newer toilets or 3 to 5 gallons of water for older toilets. Rather than dumping the entire bucket in all at once, pour the water in slowly for the best results. If you’re pouring water down the toilet to help it flush after a clog, only use 1 gallon of hot water.

The cost varies from $150 to $600, depending on the severity of the clog, pipe access, and required equipment.

In some cases, operating a snake can damage your drain and pipes. This depends on the overall condition of your pipes and how gently you operate the auger. For instance, older galvanized pipes covered in zinc are susceptible to scratches when using a drain snake. Additionally, it’s common for newbies to apply too much force when extending the snake, leading to scratches and related damage. You can also crack the porcelain with an electric auger if you’re snaking a toilet drain. If you’re using a manual snake or auger, the risk is minimal.

While some chemical drain cleaners with hydrochloric acid can dissolve hair, this method is not recommended as it can also destroy your plumbing pipes. A common DIY alternative is using baking soda and vinegar, which can help break down the clog but will not actually dissolve the hair. The best and safest method for clearing a hair clog is to remove it manually. You can use a drain snake, a straightened wire hanger with pliers to fish out the clog, or have a plumber use a professional auger for more severe blockages.