Best above ground pool installation pros near Lyle, MN

It can take 24 to 48 hours to fill a 15,000-gallon pool with a garden hose. A hose will pump out anywhere from 4 to 12 gallons per minute, with the average hose resting somewhere between 8 to 9 gallons per minute. If you want to speed up the process, a water delivery service can fill your pool in a few hours or less.

High alkalinity, which is above seven on the pH scale, is the result of improper chemical levels in the pool. Each chemical you use to keep your pool clean has a different pH, so a ratio that isn't optimized for your pool size may cause the number to go above 7.8, the high end for a good pH range in most swimming pools.

Detecting a leak in your pool costs about $300 on average. The price ranges widely from low $100 up to $1,000. Here are the costs involved in leak detection services for your pool:

• Pool inspection: $125–$250

• Above ground pool leak detection: $100–$700

• Inground pool leak detection: $400–1,000

• Vinyl liner repair: $350–$3,600

• Fiberglass lining repair: $300–$400

• Concrete liner repair: $75 per linear foot

• Pressure test pool lines: $200–$500

• Skimmer repair: $100–$250

• Main drain repair: $400–$700

• Pump repair: $50–$300

• Tile repair: $20-$30 per linear foot

You should avoid filling your pool overnight—just as a precaution. You’ll want someone around to check on the progress. If your hose springs a leak or you overfill your pool, you could end up with some costly water damage. At worst, you could flood your home’s foundation. For this reason, ensure someone is home and awake, even if your pool takes a couple of days to fill.