Get matched with top septic tank pros in Ivanhoe, MN

How do you set your well’s pressure tank? All you need to do is first drain the tank of water and find the pressure switch. Remove the switch cover and adjust the switch with a wrench—clockwise to increase water pressure, and counter-clockwise to reduce it. Each complete turn of the nut on the switch should equal 2.5 psi. Once this is done, replace the switch cover. All that’s left is to adjust the pressure of the tank itself using an air compressor and a tire gauge to support the new setting.

Several things can ruin a septic tank over time, including dumping harsh chemicals (like bleach and ammonia), pesticides, and paint thinners down your drain because they can kill the bacteria in your septic tank. You should also make sure to only flush waste and toilet paper in your toilet—otherwise, you could clog your system.

Your septic tank naturally contains the good bacteria it needs, so you typically don't have to add more as the system produces them on its own. However, if you wish to replenish the bacteria, you can use natural methods. For example, you can add three rotten tomatoes to your garbage disposal or flush 1/4 ounce of active yeast down the toilet every three months. While store-bought septic enzymes and chemicals are available, many additives are unnecessary and may even harm your system. The most effective way to maintain a healthy bacterial balance is to avoid using chemical drain cleaners, which can kill the beneficial bacteria in your tank.

The lifespan of your well casing depends mainly on the material it’s made from. Stainless steel and galvanized steel casings are designed to withstand the pressures and environment of deep-water wells but are susceptible to corrosion. Most steel casings last from 20 to 35 years, on average. PVC casing is highly durable and, if used correctly, can last up to 50 years.