Get matched with top epoxy flooring pros in Hampton, MN

Most garage floor paints are epoxy-based and available in DIY kits. One-part epoxies are simpler to apply than two-part epoxies, which have a more involved process. Sometimes, people also use latex-based paint because it’s easier to clean up mistakes with soap and water. Either way, make sure your paint is specifically designed for concrete garage floors. It should say so on the label.

The lifespan of stained concrete can range from five years to a lifetime, depending on the type of stain used and how well it is maintained. Acid-based stains penetrate the concrete and can last 20 years or more, while water-based stains are less durable and may last around five years, especially on outdoor surfaces exposed to UV light and weather. To preserve the color and extend the life of the finish, stained concrete should be properly sealed and then resealed every three to five years. Factors like foot traffic, climate, and proper initial application also affect its longevity.

The biggest downside of sealing concrete is that it needs to be resealed every few years. This routine maintenance can be laborious if you do it yourself and expensive if you hire a professional. Beyond that, sealing concrete can make the surface slippery, which can be dangerous with people with mobility issues, young children, or those with pools near their patios.

Yes, you can seal old or existing concrete, but proper preparation is crucial. The concrete surface must be clean, dry, and free of any incompatible old sealant. To check if an old sealer is present, drip a few drops of water onto the surface; if the water is absorbed in under five minutes, it's ready to be resealed. If you plan to use the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are using a different type of sealer, the old one must be completely removed. Before applying the new sealer, thoroughly clean the concrete and repair or fill any cracks to ensure a smooth, well-prepared surface.