Get matched with top stone countertop pros in Goodview, MN

The average cost to install or replace countertops is $3,105, with most projects falling between $1,858 and $4,177. However, the total price can range from $400 to $8,500 depending on several key factors. The most influential cost factors include the countertop material, the size in square feet, the quality of the new countertops, and the complexity of the job, such as the number of sink cutouts, corners, and special edging. Other considerations are the accessibility of the installation area and whether the project includes the removal and disposal of your old countertops. You have a wide array of material options to choose from. Laminate is generally the most budget-friendly, costing between $8 and $27 per square foot. On the higher end, slate countertops range from $30 to $90 per square foot. Other popular materials with varying price points include butcher block, quartz, granite, stainless steel, Corian, and wood.

No, you should not put a hot pan or pot directly on a quartz countertop. While quartz is generally heat-resistant, the resin binders used in its manufacturing are sensitive to extreme heat. Placing a hot pan on the surface can damage the resin, leading to discoloration or other cosmetic issues. If the heat exceeds 150 degrees Fahrenheit, it can cause permanent damage, such as burns or even cracking. To protect your countertop, always use trivets or hot pads.

Quartzite countertops are porous, meaning that liquids can seep into the stone and stain them. You’ll need to seal them before installing and resealing annually, depending on use and stone material. Sealing will help prevent stains and etching. On the other hand, you don’t need to seal quartz and other engineered stone countertops since they aren’t porous.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.