Get matched with top countertop and backsplash pros in Erhard, MN

Baking soda can damage some countertops, but it makes an excellent mild abrasive for removing stains on other countertops. For example, never use baking soda on quartz or glass countertops, but you can use it on laminate and tile. Stay away from using it on quartz because it can scratch and damage the counter, and glass is prone to scratches. Since baking soda is a mild abrasive, you can only use it on certain surfaces.

Yes, a 12-inch countertop overhang will need support to keep it stable. The exact type of support depends on your countertop thickness and material. Thicker, heavier countertops need extra support, like a corbel or a post, to keep them from sagging or toppling over.

You should use glue and screws when installing butcher block countertops. Opt for a construction adhesive or wood glue applied along the top edge of your base cabinets. For added strength, install support brackets on the base cabinets, then secure your countertop with screws. Make sure you only tighten the screws to the point where the butcher block is snug against the cabinet and don’t overtighten.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.