Get matched with top dryer vent cleaners in Emmons, MN

Using less toilet paper is the easiest way to prevent future clogs. Also, avoid flushing sanitary products, thick paper towels, or hair down the toilet. If you’ve been using a brick in the tank to reduce the water used to flush the toilet, take it out immediately. Bricks will eventually fall apart and clog your toilet drain. Keeping your toilet lid closed also helps avoid future clogs.

It’s possible to clean your dryer vent yourself in most cases, but it’s usually best to leave this important task to a professional. If you make a mistake when reinstalling the vent, you could kink it, which makes it easier for a blockage to form. Instead, call in a professional annually to do a thorough cleaning and an inspection. They will make sure there are no kinks in the vent that could promote blockages in addition to cleaning it. If your vent runs through a wall, you’ll need help from a professional regardless.

The length of an allowable dryer vent varies based on the local building codes and regulations. Typically, the maximum range is 25 to 35 feet. However, if the vent must have any 90-degree turns, you may see a reduction of five feet from the maximum. Some municipalities may have no specific maximum allowable length as part of the code. Typically, installers will run the vent over the shortest possible distance for safety. The dryer vent cleaning cost is less with a shorter vent length as well. 

A burnt rubber smell coming from your clothes after they’ve been in the dryer can be the result of too much lint in the lint trap. This prevents air from circulating properly, and the lint may even come into contact with the heating element. It could also be the result of bigger issues like a faulty thermostat or worn-out dryer belt. A burnt rubber smell can even come from elastic waistbands or rubber decals in your clothes. To remedy this, dry clothes on a lower heat setting or allow them to air dry instead.