Top-rated countertop and backsplash pros.

Get matched with top countertop and backsplash pros in Wilson, MI

Enter your zip and get matched with up to 5 pros

Need a pro for your countertop and backsplash service project in Wilson, MI?

Select your specific project to find the pro for you.

Find Countertop and backsplash pros in Wilson

Avatar for WELCH TILE & MARBLE
WELCH TILE & MARBLE
4.9(
11
)
Laminate Countertops - InstallLaminate Countertops - RepairSolid Surface Countertops - Install (Concrete, Stainless Steel, etc)+3 more

Serving Wilson, MI and surrounding areas

In business since 1987

Free estimates

Credit card accepted

"Brady came and gave me an estimate.  They were able to start the work the next day.  It went quite well.  They ran into a slight problem in that some of the sub floor came up with the tile.  But it did not result in much of a price increase.  The floor was extremely uneven, but after they were finished, it was even and ready for us to install our floating floor.  They did a great job.
"
Recommended by100%of homeowners
Countertops and Backsplashes questions, answered by experts

There are many benefits of granite countertops, but it’s not unusual for them to have seams—especially if you’re working with small slabs joined together. Seams are common on larger islands where the installer needs to use more than one granite slab to cover the surface. Luckily, because seams are normal in granite countertops, pros know how to hide them properly, so you’d never know they were there.

You attach solid surface counters with construction adhesive. Once your slab is ready, you fit it to the wall, apply the adhesive, and secure it in place with clamps until the glue dries. This usually takes several days. 

Afterward, you install the backsplash, faucets, and more. At this point, you can caulk the counter, allow it to dry for 24 hours, and then you're done with the installation.

When installing an undermount kitchen sink in a granite countertop, use 100% silicone to secure the basin. If you’re worried your sink is too heavy, speak with a countertop professional about how to adhere the sink to the countertop without worrying about issues down the road. Sagging undermount sinks can be a common plumbing problem if they’re not properly adhered, so always make sure you’re using a high-quality material.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

The least expensive way to build a kitchen countertop is to choose an affordable material. For example, laminate countertops cost about $1,250, while Corian® countertops cost $4,000 on average. Common wood and laminate tend to be the most affordable and DIY-friendly, which will save you the cost of labor. Otherwise, look for lower-end solid surface countertops or ceramic and stone tile. These cost less than natural stone slabs.

The Wilson, MI homeowners’ guide to countertop and backsplash services

From average costs to expert advice, get all the answers you need to get your job done.