Swick provides home services to Marquette, Negaunee, Ishpeming, Munising and the greater area of the Upper Peninsula of Michigan. Our services include Heating & Cooling, Electric, Plumbing, Electric Stove & Fireplace and related home services. Quality doesn't cost, it pays!
"Called in claim on 6/18; tech assigned on 6 /19; so far so good. Claim was for failed well pump with NO water to my home with two disabled seniors. Due to heavy workload and no extra pay on weekends the tech came for diagnostics 4 days later. He verified the failed pump and tried to purchase one at Home Depot. None in stock, had to be ordered. Pump came in on 6/30 and tech arrived today, 7/1, and expertly installed the new pump. Choice has a $ 500 limit on well repair, which is 1/3 of a typical bill. That dollar cap is riduculous. On a positive note, C-Force provides expert work for Choice and would be my choice for any future work."
"Called AHS....who sent service request to AAA Flexible Pipe. Adam came out quickly and installed new pump just before HEAVY rains hit...Fast and efficient service from AHS and AAA FLEXIBLE PIPE CLEANING."
Tyriver Plumbing & Heating comes with over ten years experience. Customer service, professionalism, and quality of work are our number one priorities. Reach out to Tyriver today for your plumbing and mechanical needs, we can't wait to get your job done right!
Sump Pump Installation questions, answered by experts
If you’re wondering if your home even needs a sump pump, consider whether you’ve struggled with flooding issues in the past. If your house is in a flood-prone area, your yard has poor drainage, or you’ve dealt with any other water problems, then it’s likely well worth it to replace your old sump pump with a new one.
Common problems include motor failure, clogged discharge lines, and float switch malfunctions. Regular maintenance prevents many issues.
A sump pump can be plugged into a regular, 110-volt outlet with three-prong openings, but it must have GFCI protections per the NEC, meaning you’ll need a GFCI outlet and circuit. Sump pumps require two outlet openings, one for the plug to the motor and one for the float switch.
If you have a self-cleaning washing machine but you’re still seeing lint, your water pump filter might be clogged. To clean it, you should unscrew the drain hose, then remove the water pump filter. From there, you can inspect it and clean it with warm water before replacing it. Check to be sure your washing machine is functioning by running a short cycle.
A sewage ejector pump is necessary if you have any plumbing fixtures, such as a bathroom, laundry room, or sink, located below the level of your home's main sewer line. Standard plumbing relies on gravity to drain wastewater and solid waste into the municipal sewer system or a septic tank. For fixtures below this level, like those in a basement, gravity cannot move the waste upward. The ejector pump provides the force needed to pump the sewage up to the main line. Without one, wastewater from below-ground fixtures would back up, potentially causing a sewage overflow and flooding. If all of your plumbing is on the main floor or higher, gravity is sufficient and an ejector pump is not needed.
The Munising, MI homeowners’ guide to sump pump installation services
From average costs to expert advice, get all the answers you need to get your job done.
Sump pump replacement costs depend on the type of unit you have and the cost of labor, which varies by region. Read on to find out more about what to expect.
Sump pump battery backup costs depend on the type and the design of the system purchased. Follow this guide to learn how to budget for your backup battery.
Sump pump discharge lines come in a couple of diameters and a range of lengths. Here’s how to determine the right sump pump pipe size for your installation.