Get matched with top door pros in Maple Rapids, MI

If your home cannot accommodate a traditional garage door, there are plenty of other options to choose from. Consider installing a door made of glass, fiberglass, sheet metal, or faux wood. You can also choose a unique style like a folding, tilt-up, sliding, or carriage door. Consult a local garage door installer to discuss the options available for your garage shape and size.

You put shims between the three-sided frame to which the door hinges are attached and the framing of the rough wall opening. Using shims like this will center your door in the wall opening and allows you to make small adjustments to get your door plumb and level for smooth operation. Your shims and the gap they fill will be covered when you install door trim, so don’t worry too much about the appearance.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

Leaving vents open but closing doors in unused rooms will probably not save money on your energy bill. Closed doors prevent the natural flow of air throughout the home, which could reduce the efficiency of the overall HVAC system. They could also restrict airflow into and through the return vents, making the HVAC system less efficient.